VersaTube VS3406014420WS Instruction Manual download pdf (Page 25)

INSTALLING A VERSATUBE WALK DOOR INTO A 2” X 4” BUILDING FRAME from the inside.

These instructions apply only to the VersaTube flange mounted walk door. Any pre-hung walk door can be mounted into

the frame. Most doors mount with screws through the door frame into the sides of the building frame. The VersaTube door

is attached to the frame from the inside on the building with #12 x 3/4” self-drilling screws through flanges at both sides of

the door. Insert the door into the opening from the inside of the building (the door will open inward), center the door, check

the door for plumb and attach the door to the frame with screws in every other pre-punched screw hole. You may want to

run a bead of calk along the outside edge of the door threshold to prevent any water from coming into the building.

Install door hardware.

SIDE POST

DOOR FRAME

DOOR

OPENS IN

THRESHOLD

SHEETING LEDGE

HAT CHANNEL

TOP VIEW, DOOR FRAME TO POST

DOOR SIDE FLANGE WITH

PRE-PUNCHED HOLES

PAGE 25

VIEW FROM INSIDE BUILDING

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 45 46

No comments

VersaTube VS3406014420WS Instruction Manual Page 25