VersaTube VS3406014420WS Instruction Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 46
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
INSTALLING TRIM AROUND END GARAGE DOORS
To trim the garage doors you will use two types of trim. (Angle trim and J-trim) The angle trim will finish off and cover the
door frame verticals and header. The J-trim will be fastened around the outside of the frame to finish and cover the edges
of the sheet metal panels. If the garage door is in the end wall the angle trim will be 3” x 1 1/2” (the 3” side is hemmed).
If the door is in the side wall the angle trim will be 4” x 1 1/2” (the 4” side is hemmed). J-trim is the same for side or end
wall doors.
J-trim comes in 10’-2” to 10’-6” lengths. Angle trim will come in 10’ lengths.
3” FOR END
WALL DOORS
4” FOR SIDE
WALL DOORS
1 1/2”
2 1/4”
7/8”
1”
ANGLE TRIM
J-TRIM
1”
MAKE TWO 1” LONG CUTS IN
THE BOTTOM CORNERS OF
THE J-TRIM TO CREATE A TAB.
FOLD THE TABS DOWN INTO
THE SIDE J-TRIM
TWO 1” LONG CUTS
Cut one piece of angle trim to fit under the door header and two pieces of angle trim
to fit from the door header to the slab (side angle trim). Now, cut one piece of j-trim
the width of the door opening plus 2”. This piece of j-trim will fit at the door header
and extend 1” on each side over the side j-trim. Make two 1” long cuts in the bottom
corners of the J-trim to create tabs that will fold down into the side j-trim. (See
illustration at left) Cut two pieces of side j-trim to fit from the slab to the under side of
the header. Nest the side angle trim and the side j-trim together and attach both
pieces with the same screws to the frame as shown above. Repeat for the other side
of the door opening. Now, insert the angle trim for the door header and place the
header j-trim on top of the side J-trim centered. Fold the end tabs down into the side
j-trim and attach the header j-trim and header angle to the frame with screws. (use
#10 x 7/8” pan head, square drive, self-drilling screws)
DOOR HEADER ANGLE TRIM
DOOR HEADER
J-TRIM
ANGLE TRIM
J-TRIM
SIDE ANGLE TRIM
SIDE J-TRIM
TRIM FOR LEFT SIDE
OF DOOR, NOT SHOWN
#10 PAN HEAD SCREW
PAGE 31
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 45 46

Comments to this Manuals

No comments